Fetco HWB-15 15-Gallon Hot Water Dispenser H15011
Need a workhorse hot water source for medium-to-heavy duty foodservice prep? The Fetco HWB-15 is purpose-built for the job. Dial the thermostat to your preferred dispensing temperature and the unit delivers consistent, precise hot water on demand — perfect for oatmeal, gravy, instant soups, cheese sauces, gelatins, mashed potatoes, and any prep task that depends on a steady supply.
An adjustable Controlled Refill feature lets you tune recovery rates so the unit keeps up during peak service. Heavy-gauge stainless steel construction stands up to daily abuse, and the fully-insulated top and sides retain heat for better energy efficiency while keeping the exterior cool to the touch. A permanent faucet guard adds an extra layer of sanitation by limiting vessel-to-spout contact.
A lighted power switch confirms when the unit is on, and a green "Ready" LED illuminates the moment water reaches your target temperature.
Why the HWB-15?
- Right-sized capacity — 15 gallons handles medium-to-heavy duty foodservice and cleaning workloads.
- Built to last — Heavy-duty Fetco construction delivers years of trouble-free service.
- Steady flow under pressure — Controlled Refill keeps hot water available during peak demand.
- Hygienic by design — Permanent faucet guard reduces cross-contamination at the spout.
Specifications
| Measurements | |
|---|---|
| Height | 28 3/4" |
| Width | 20 1/8" |
| Depth | 27 3/4" |
| Shipping Weight | 79 lbs |
| Capacity | |
| Volume | 15 gal/hr (57 L/hr) |
| Recovery | 11.2-51.5 gal/hr |
| Approx. cups/hr (8 oz) | ≈118 |
| Standard Electrical | |
| Configuration | Terminal Block |
| Voltage | 120/(208-240) |
| Amps | 22.1-25.5 |
| Phase | 1 or 3 |
| Special Features | |
| Faucet Guard | Yes |
| Silicone Tap | No |
| Temperature Selections | 1 |
| Body Construction | Stainless Steel |
| Water Specs | |
| Water Inlet Size | 3/8" |
| Min Flow Rate | 2.0 gpm |
| Water Pressure | 20-75 psig |