Fetco HWB-25 25-Gallon Hot Water Dispenser H25011
When demand for hot water is steady and the workload is heavy, the Fetco HWB-25 delivers. Sized for 25 gallons, this dispenser is the right tool for high-volume foodservice prep and cleaning. Set the thermostat once and the unit holds your selected temperature for consistent results across oatmeal, gravy, instant soups, cheese sauces, gelatins, mashed potatoes — anywhere a reliable hot-water supply keeps the kitchen running.
An adjustable Controlled Refill feature lets you dial in recovery to match peak demand. The unit is fabricated from durable stainless steel that holds up to daily abuse and cleans up easily. Fully-insulated top and sides retain heat for better energy efficiency and keep the exterior cool to the touch. A permanent faucet guard limits vessel-to-spout contact for an added layer of sanitation.
A lighted power switch confirms the unit is energized, and a green "Ready" indicator signals when water reaches your pre-set temperature.
Why the HWB-25?
- High-volume capacity — 25 gallons sized for heavy-duty foodservice and cleaning workloads.
- Built tough — Heavy-gauge stainless steel for years of reliable service.
- Steady flow under peak demand — Controlled Refill keeps hot water available when you need it most.
- Hygienic by design — Permanent faucet guard reduces cross-contamination at the spout.
Specifications
| Measurements | |
|---|---|
| Height | 29 5/8" |
| Width | 28 1/8" |
| Depth | 27 3/4" |
| Shipping Weight | 134 lbs |
| Capacity | |
| Volume | 25 gal/hr (95 L/hr) |
| Recovery | 33.5-137.4 gal/hr |
| Approx. cups/hr (8 oz) | ≈914 |
| Standard Electrical | |
| Configuration | Terminal Block |
| Voltage | 120/(208-240) |
| Amps | 38-60 |
| Phase | 3 |
| Special Features | |
| Faucet Guard | Yes |
| Silicone Tap | No |
| Temperature Selections | 1 |
| Body Construction | Stainless Steel |
| Water Specs | |
| Water Inlet Size | 3/8" |
| Min Flow Rate | 2.0 gpm |
| Water Pressure | 20-75 psig |